Home  >  Products   >   Rock Crusher  >  Jaw Crusher

Jaw Crusher

1.Introduction of PE Jaw Crusher
2.Working Principle
4.Specification and Model

Jaw Crusher


Capacity:1~140 t/h

Max feed size:480 mm

Finish powder:65~160 mm

Range of application: Almost all minerals, such as quartz, feldspar, mica, calcite, gypsum, fluorite, limestone, soil, clay, marble, granite, pebble, coal, slag, iron ore, copper ore, manganeseore, refractory material, glass, etc.

Introduction of PE Jaw Crusher

PE jaw crusher is mainly used in metallurgy, mining, chemical industry, cement, construction, refractory materials and ceramics, etc., suitable for crushing hard ore and soft ore with compressive strength less than 320MPa. The machine can break the material into medium size and fine size.

Working Principle

Jaw crusher is mainly composed of frame, eccentric shaft, jaw plate, connecting rod, adjusting part, spring and so on.

When the belt and pulley are driven by the motor, the jaw plate moves up and down through the eccentric shaft. When the movable jaw moves upward, the Angle between the jaw plate and the support becomes larger, thus pushing the movable jaw plate closer to the fixed jaw plate. At the same time, the material is crushed with the movement of the moving jaw.

When the movable jaw moves down, the Angle between the movable jaw and the support becomes smaller. Under the action of spring and connecting rod, the movable jaw plate leaves the fixed jaw plate, and the crushing material with qualified size is discharged from the crushing chamber. With the continuous rotation of the motor, the moving jaw will crush the material and discharge it from the lower discharge port, so as to achieve the purpose of mass production.


1. Low noise and less dust.

2. The crushing ratio is large, and the product size is uniform.

3. The structure is simple, the work is reliable, and the operating cost is low.

4. The lubrication system is safe and reliable, the replacement of parts is convenient, and the equipment maintenance is simple.

5. The crushing cavity is deep and there is no dead zone, which improves the feeding capacity and output.

Specification and Model

TypeFeedopening Size (mm)Feeding size (mm)Output Open Range (mm)Capacity (t/h)Powder (Kw)Dimension L*W*H (mm)
PE150×250 150×250 125 10~40 1~5 5.5~7.5 988*745*933
PE200×350 200×350 125 15~40 5~16 7.5~11 1056*1142*1220
PE250×400 250×400 210 20~60 5~20 15~18.5 1430*1310*1340
PE400×600 400×600 350 40~100 15~60 30~37 1700*1732*1653
PE500×750 500×750 425 50~100 40~100 45~55 2035*1921*2000
PE600×900 600×900 480 65~160 60~140 55~75 2290*2206*2370

Clirik is a professional manufacturer of mining machinery and equipment, the production of machinery and equipment in the world are very popular, if you are interested in our equipment, please contact us through the contact information on the page, we also have professional engineering and technical personnel for you to customize machinery and equipment, to meet your requirements, to create suitable for your use of equipment, welcome your call!